Tuesday, September 29, 2020

Happy Birthday...{MCT Birthday Palooza}

Good Morning and welcome to another
My Creative Time Birthday Palooza post day!
Today I am sharing a fun birthday card using some of the older MCT stamps and dies
Take a look at my project and let me know what you think....
To make my card I started with a kraft cardstock base, added a layer of white cardstock and then a layer of pretty designer paper from American Crafts.
Next I die cut a square out of the center of my card layers where I ended up placing a clear acetate sheet to make a window in my card.
Using the adorable cloud dies, I added those to the top of the window, lining them up inside the square.
Using the balloon dies, I added 2, popped up onto the front of my card using matching designer paper.
With some matching twine, I added bows to both balloons.
Finally for the sentiment, I used the a Strip sentiment die and the stamp from the Especially for you set. The sentiment was then popped up onto the balloon.
A few random enamel dots and my card is complete.

MCT Products Used:

So there is my completed card. I hope you like it!!
As always, thanks for stopping by my blog!
Make sure to check out what the rest of the DT made over on the
 

Friday, September 18, 2020

MCT 104th New Release BIG Reveal & Blog Hop!

Good Morning Everyone and Happy Friday!
Welcome to the 104th New Release from
My Creative Time!

This has been such an fun week of amazing projects from the DT~ don't you think???
But there is one more day of projects with so lets get started....
You should be coming from the VERY talented
but if you are just stopping in, make sure to head back to the start~ the AMAZING
You are not going to want to miss a thing!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For my inspiration I get to showcase the new 
Bat Rosette Dies
 & 
Mini Witch Hat Topper Die (Freebie)
Take a look at my project and let me know what you think...
For my project I made a treat tag using both the Bat Rosette Die and Mini Witch Hat Topper Die.
To make my tag, I started with the Tag Die and Tag Die Layers for the base of my tag. Both were die cut using some halloween designer paper from Authentique.
Next I made my bat rosette using the smaller of the 2 dies, adding that to my tag.
Then I die cut the Mini Witch Hat Topper which I used as a focal point on the rosette rather than a topper.
For the sentiment, I used the new Spooky Tags and Happy Witchin stamp set, adding that to my tag.
To finish off my project, I added some twine to my packaging of M&M's attaching the tag with a small bow.

MCT Products Used:
Bat Rosette Dies
Mini Witch Hat Topper Die
Happy Witchin
Spooky Tags
Tag Dies Layers
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Now for the WHOLE release...












 ***FREEBIE***
Starting Friday September 18th, 2020 at 8am PST, Emma will be giving away this new "Mini Witch Hat Topper Die."   This new die set will be given to the FIRST 40 shoppers! If you are one of the 1st 40 shoppers, it will automatically be added to your package at the time of packing/shipping. Once 40 shoppers come through, this die set will be available for purchase! So, if it's available in the store, you are not one of the 40. No exceptions will be made. This freebie is not part of the "bundle" and will be sold separately. 

 ***BLOG HOP GIVEAWAY ***
Leave your comments on each blog for a chance to win a $25 Gift Card to my store.  One lucky winner will be chosen on September 23rd on my blog!  GOOD LUCK my friends! 

***SALE ALERT***
ALSO, DON'T FORGET our sale starts RIGHT NOW here
Use the code: SEP2020 to receive a 15% discount off your entire purchase! This sale applies to "IN-STOCK" items ONLY. This sale will end on Friday,  September 25th, 2020 @midnight PST.

Well your time with me is up... your next stop along the hop is the super sweet and very talented
Thanks so much for hopping along with us and have a GREAT Friday!!!

BLOG HOP LINE UP 
Jessica~ ME

Thursday, September 17, 2020

MCT 104th New Release Sneak Day 4

Good morning everyone and welcome to the final day of sneaks for the
104th New Release from My Creative Time!
We have two more new die set to showcase today before we share the entire new release tomorrow for the BIG REVEAL & blog hop!
For today Miss Emma has created the super fun
Coffin Treat Box Die
Spooky Tags
Take a look at my project and let me know what you think...

How fun is this new Coffin Treat Box?!?
I am loving it! The coffin treat box is a great size to hold lots of halloween goodies!
To make my project I used some pretty black polka dot designer paper and die cut the box top and base. Once assembled I did add a piece of acetate behind the spider web cut out to make sure nothing falls out.
I filled my coffin with 2 hershey bars and added a piece of black twine around the whole box to secure everything and avoid any treats falling out.
Next for the sentiment, I used the new spooky circle tags, die cut in black and white cardstock where I placed my sentiment using the Happy Witchin set.
Finally to finish off my project I popped up that fun bat die cut to the top of the coffin.
A quick and super spooky way to hand out some halloween treats!

MCT Products Used:
Coffin Treat Box Die
Spooky Tags
Happy Witchin

***Sneak Peek giveaway!***
We will be giving away the sets we are showcasing each day to ONE lucky winner! For example, the set we are showcasing on Wednesday, Emma will announce the winner of that on Thursday & the sets we are showcasing on Thursday, Emma will announce that winner on Friday on my blog! ALL you have to do is leave a comment on each of our blogs! You are NOT required to comment on EVERY SINGLE blog, but the more you comment on, the more chances you have for winning! VERY IMPORTANT, PLEASE leave a way for us to contact you w/your comment just in case "YOU" are the lucky winner! For EXTRA entries, you can spread the word about this release on Facebook, tweet about it OR even instagram it! #mycreativetime! GOOD LUCK EVERYONE & let's start spreading the word!;)

Thanks for stopping by for Day 4 of sneaks!!
Please come back tomorrow for the BIG Reveal & Blog hop!
Make sure to check out the rest of the inspiration from the DT over on the


Wednesday, September 16, 2020

MCT 104th New Release Sneak Day 3

Good Morning and welcome to Day 3 of sneaks for the
104th New Release from MCT!
We have another awesome new set of dies to showcase....
Introducing the
Bat Bow Dies
Take a look at my project and let me know what you think...
To make my project I used the adorable Treat Holder Die and some fun bat pattern paper. Once the holder was assembled I went ahead and die cut the Medium Size Bat Bow Die in black cardstock. For the center of the bow, I used the same matching bat pattern paper but instead I used the opposite side which happened to be a pretty blue color
 I filled my treat holder with some chocolates and then added a sentiment tag. 
The tag was made using the Little Gift Tag Dies and a sentiment from the Happy Witchin set.
I attached the tag onto the treats with some twine as well as adding the bat bow to the front and my project was complete.

MCT Products Used:
Medium Size Bat Bow Dies
Happy Witchin

***Sneak Peek giveaway!***
We will be giving away the sets we are showcasing each day to ONE lucky winner! For example, the set we are showcasing on Wednesday, Emma will announce the winner of that on Thursday & the sets we are showcasing on Thursday, Emma will announce that winner on Friday on my blog! ALL you have to do is leave a comment on each of our blogs! You are NOT required to comment on EVERY SINGLE blog, but the more you comment on, the more chances you have for winning! VERY IMPORTANT, PLEASE leave a way for us to contact you w/your comment just in case "YOU" are the lucky winner! For EXTRA entries, you can spread the word about this release on Facebook, tweet about it OR even instagram it! #mycreativetime! GOOD LUCK EVERYONE & let's start spreading the word!;)

Thanks for stopping by for Day 3 of sneaks!!
Please come back tomorrow for another fun sneak!!
Make sure to check out the rest of the inspiration from the DT over on the


Tuesday, September 15, 2020

MCT 104th New Release Sneak Day 2

Good morning everyone and welcome to Day 2 of sneaks for the
104th New Release from My Creative Time!
Today we are showcasing 2 new sets
Introducing the ….
Bat Rosette Dies
Mini Witch Hat Topper Die (Freebie)
Take a look at my projects and let me know what you think...
How fun are these new sets?  I used the new sets to make 2 projects today because I just love them so much!!
For my 1st project I made a lollipop holder using the new Bat Rosette Die.
I started with the adorable Mini Stitched Lollipop die and some fun pattern paper from my stash! Once the lollipop holder was die cut, I used some matching black cardstock for the rosette. This rosette is the smaller one from the set and fits so perfectly onto the lollipop holder!
For the sentiment, I used the scalloped die that come with the lollipop holder and die cut that in orange cardstock. Next I used the More Stitched Circle die for the center of the scallop and the soon to be released Happy Witchin set for the sentiment.
A mini Original Gourmet Lollipop and some orange twine finished this project!
Next for my card I did something alittle different! I took the new Mini Witch Hat Topper Die and added it to my card with alittle treat!
I used a kraft cardstock base and then added 2 layers of cardstock using the Etched Edge Frame Dies.
Next I die cut the Mini Witch Hat Topper Die, assembled it with a few M&M's in a little treat bag and placed it aside while I finished the card.
I used the More Stitched Circle Dies and a sentiment from the Happy Witchin set for the base to hold my treat.
I popped the Mini Witch Hat up onto the sentiment circle to then complete my project.
I have a little sweets and a card to send for a happy halloween treat!

MCT Products Used:
Bat Rosette Dies
Mini Witch Hat Topper Die

***Sneak Peek giveaway!***
We will be giving away the sets we are showcasing each day to ONE lucky winner! For example, the set we are showcasing on Wednesday, Emma will announce the winner of that on Thursday & the sets we are showcasing on Thursday, Emma will announce that winner on Friday on my blog! ALL you have to do is leave a comment on each of our blogs! You are NOT required to comment on EVERY SINGLE blog, but the more you comment on, the more chances you have for winning! VERY IMPORTANT, PLEASE leave a way for us to contact you w/your comment just in case "YOU" are the lucky winner! For EXTRA entries, you can spread the word about this release on Facebook, tweet about it OR even instagram it! #mycreativetime! GOOD LUCK EVERYONE & let's start spreading the word!;)

Thanks for stopping by for Day 2 of sneaks!!
Please come back tomorrow for another fun sneak!!
Make sure to check out the rest of the inspiration from the DT over on the


Monday, September 14, 2020

MCT 104th New Release Sneak Day 1

Good Morning and welcome to Halloween Week for the 104th NEW RELEASE!
Miss Emma has some awesome new stamps and dies that I know you are all going to LOVE!
For Day 1 the DT is showcasing the super fun stamp/die sets
Lot's of Greetings
Happy Witchin
Scalloped Tall Frame
Take a look at my project and let me know what you think...
To make my project I took the largest of the Scalloped Tall Frame Dies and cut it out in some black cardstock.

Next I added a layer of orange cardstock, die cut using the Tall Frame Die and added it to the Scalloped Tall Frame. 

Using the adorable new Happy Witchin set, I colored my witch using my copics and then die cut her out. I ended up popping her up onto the card mat after adding my sentiment...also from the Happy Witchin set.

I added a twine bow using some Trendy Twine and then decided to make my card mat into an actual card so I took the same Tall Frame Die as the outside panel and die cut another to make a card base. The whole scalloped panel was then added to the card base so now I have a card space to add a note or message.

MCT Products Used:
Happy Witchin
Scalloped Tall Frame

***Sneak Peek giveaway!***
We will be giving away the sets we are showcasing each day to ONE lucky winner! For example, the set we are showcasing on Wednesday, Emma will announce the winner of that on Thursday & the sets we are showcasing on Thursday, Emma will announce that winner on Friday on my blog! ALL you have to do is leave a comment on each of our blogs! You are NOT required to comment on EVERY SINGLE blog, but the more you comment on, the more chances you have for winning! VERY IMPORTANT, PLEASE leave a way for us to contact you w/your comment just in case "YOU" are the lucky winner! For EXTRA entries, you can spread the word about this release on Facebook, tweet about it OR even instagram it! #mycreativetime! GOOD LUCK EVERYONE & let's start spreading the word!;)
Thanks for stopping by for Day 1 of sneaks!!
Please come back tomorrow for another fun sneak!!
Make sure to check out the rest of the inspiration from the DT over on the

Wednesday, September 9, 2020

Welcome to Our Class!....{MCT Anything Goes}

Good Morning everyone!
I am up on the MCT blog with a fun back to school treat!
My youngest started his senior year yesterday and even though the start of this year is NOTHING that we hoped it would be, I am sure he is going to make the most of his 2020-2021 senior year!
Since he is also too big for sweet treats like my project, I am sure any teacher/kiddo would love to see something like this on their desk.
Take a look at my project and let me know what you think...
To make my project I used the Stitched Favor Box Die and some fun apple pattern paper from Pebbles. Once the favor box was assembled, I added my sentiment using the You're All Write set. The sentiment tag was added to my project using a mini clothes pin.
Finally I finished my project by adding a brown Trendy Twine bow.

MCT Products Used:
Stitched Favor Box Die

So I hope you have enjoyed my project! As always I appreciate you stopping by today.
For more inspiration make sure to head over to the MCT blog and check out what the rest of the DT has to share!

Thanks so much for stopping by today and have a GREAT Wednesday!

Wednesday, September 2, 2020

Happy Fall....{MCT 3D Wednesday}

Good Morning and happy hump day everyone!
I am up on the My Creative Time blog today with another
3D Wednesday project!
I LOVE making treats and with fall right around the corner I have a fun treat idea using the newly back in stock Stitched Lollipop Holder Die!
Take a look at my project and let me know what you think..
To make my project I used the Stitched Lollipop Holder Die and some fun fall pattern paper from my stash.
Once it was die cut, I used a circle die from the More Stitched Circle Dies set to stamp my fall sentiment. The sentiment, from the All Around Holidays set fits so nicely into the circle which was then layered onto the scalloped circle and then popped up onto the Lollipop Holder.
For the adorable leaf die cut, I also used the All Around Holidays set and die cut it with some matching orange cardstock. I cut 2, placing one inside the sentiment and the other onto the bottom corner of my treat.
To finish off my project, I added an Original Gourmet Lollipop and tied it in with some brown Trendy Twine.
A sweet treat to welcome Fall time!

MCT Products Used:

So I hope you have enjoyed my project! As always I appreciate you stopping by for 3D Wednesday!
For more inspiration make sure to head over to the MCT blog and check out what the rest of the DT has to share!

Thanks so much for stopping by today and have a GREAT Wednesday!

See that beautiful sunflower in the background...that's in my garden!
Here are some more pictures of these gorgeous flowers!